Recent Blog Posts

Ammonia Week in Review | April 18, 2025

April 18th, 2025

Repeats and Fines in this week’s edition of the Ammonia Week in Review… Second Ammonia Leak in Six Years Forces Arena Shutdown in Port Alberni – This is the second time in six years that the chiller has suffered a “catastrophic failure,” according to city officials. […keep reading] Ammonia Leak Happens at Tyson Foods Poultry Plant – All workers […]

Ammonia Refrigeration Valve Tags

November 26th, 2024

This is an update to a blog that was originally posted on 10/4/16. You can read the original blog here. When reviewing an ammonia refrigeration Piping and Instrumentation Diagram (P&ID) and comparing it to the actual refrigeration system, I am often surprised at how often valves have not been physically labeled to match the P&ID. […]

Ammonia Refrigeration System Oil Draining Requirements

October 29th, 2024

Ammonia refrigeration systems must be equipped with a means of draining oil from the system. Over time, small amounts of oil are carried out of the compressors and mix with the ammonia vapor. The ideal place to collect and drain this oil is on the low pressure side of the refrigeration system. The cold temperatures […]

Ammonia Component Marker Requirements

October 1st, 2024

This is an update to a blog that was originally posted on 5/25/15. You can read the original blog here. New Ammonia Refrigeration Systems For new ammonia refrigeration systems, all vessels and equipment (compressors, condensers, etc.) must follow the component marker requirements in ANSI/IIAR 2-2021 §4.2. The standard states the following in regard to component […]

Ammonia Week in Review | September 6, 2024

September 6th, 2024

Ammonia Sails in this week’s edition of the Ammonia Week in Review… ClassNK Publishes Ammonia Leak Estimates – Japanese classification society ClassNK has published estimated leak frequencies of ammonia fuel from onboard components for ammonia-fuelled ships, to be used for risk assessment. […keep reading] Q&A | Safe Access to Equipment – Question: Do I have to provide safe access […]