I recently received an email from a client asking if it is allowable to remove a pressure vessel nameplate and position it in another location on that same vessel. Here is the response that I gave: Dear John, Unfortunately, ASME National Board does not allow nameplates to be removed unless approved by an inspector and an updated […]
It is common to find Process Safety Information documentation lacking within a PSM program. Unfortunately, this deficiency is not limited to “older” facilities, but often occurs after the installation of a new system or a new component within an existing system. To help remedy this, we have developed the following Request for Proposal (RFP) Addendum. […]
Ammonia travels to space in this week’s edition of the Ammonia Week in Review….. Ammonia Leak Complicates Spacewalk Work On ISS – Spacewalking astronauts encountered leaking ammonia and minor glove damage while performing plumbing work outside the International Space Station on Friday, then fell so far behind that they had to leave a radiator job undone. […keep reading] Fire Departments Handling […]
Resource Compliance enjoyed participating in the 2015 Stanislaus Chemical Safety Day. Thanks to all who stopped by our table at the event. Anyone interested in downloading the slides from Peter Thomas’ presentation on Recognized and Generally Accepted Good Engineering Practices (RAGAGEP), can do so here.
ANSI/IIAR 5-2013 Start-Up and Commissioning of a Closed-Circuit Ammonia Refrigeration Systems outlines the “basic minimum requirements for the safe start-up and commissioning” of ammonia refrigeration systems. One of the critical requirements contained within this document is that facility personnel be notified prior to ammonia being delivered onsite. ANSI/IIAR 5-2013 §7.8.4 Notice shall be given to […]
Whether you are in need of a complete process safety management program or simply looking for a second opinion, Resource Compliance is here to help. Please contact us today. We look forward to hearing from you.
Join Our Email List